Cart is empty. Please go to your home page for listing it.
A floor sheet is a long-lasting, non-slippery surface constructed of such materials as PVC or vinyl to give a seamless and easy-to-clean surface to the house, commercial, and industrial areas. PVC floor sheet, or vinyl floor sheet as it is commonly referred to as an alternative to ordinary tiles and marble flooring, is a convenient substitute for the conventional tiles and marble floors. These sheets come in rolls and planks that are easily applied with adhesive, giving a homogeneous surface that does not allow moisture or stains.
A floor sheet is a waterproof floor sheet; hence it is best suited for places that are open to water e.g. kitchen, bathroom and hospitals. Floor sheets are also becoming a growing trend in Pakistan due to their affordability, vast range of designs, and low maintenance requirements, thus making them one of the least expensive flooring products to use in modern interior design.
The cost-effectiveness that comes with the use of floor sheets is one of the greatest benefits of the use of floor sheets as compared to tiles, marble, or wooden flooring. In Pakistan, the cost of floor sheets is significantly lower compared to other flooring products, which makes it a perfect choice among the homeowners and those who want to use a long-lasting yet cost-effective product.
The great advantage of a floor sheet is that it is a waterproof floor sheet, which covers the floor and floor surfaces against moisture, spills and stains. Antibacterial vinyl sheets can also be a part of many contemporary options, and they contribute to the preservation of a hygienic environment, particularly in a hospital, a clinic or a school.
Floor sheets are very easy to maintain besides being durable. Sweeping regularly and mopping occasionally suffice to have them looking new. Finally, their diverse designs, such as wood-look and marble-look floor sheet designs, enable property owners to attain a classy interior without the expensive nature of natural products.
Modern flooring is available in such a range of floor sheets, every single one being targeted to suit various requirements, such as sleek decorative interiors in homes or hardy work-related commercial floors. The most common ones applied in Pakistan are as listed below.
The PVC floor sheet, or a vinyl floor sheet, happens to be the most common sheet flooring used today. The two terms are used to refer to the same content, which is polyvinyl chloride (PVC), which is a synthetic plastic polymer that is very strong, flexible and resistant to water.
Flooring Vinyl floor sheets are available in two major constructions:
Homogeneous Vinyl Sheet Flooring: Vinyl sheet flooring, which consists of a unitary, homogeneous sheet of PVC composition, has the advantage of the homogeneous color and design across the sheet. It is very hard-wearing and can be used in busy places like hospitals and schools.
Heterogeneous Vinyl Sheet Flooring: The heterogeneous vinyl sheet flooring, however, is made up of a combination of several layers, one of which is a printed design layer, and then the protective wear layer. In this version, it allows greater aesthetic options, such as wood, marble or stone covering, although it retains high wear resistance and easy maintenance.
PVC and vinyl sheets are also used due to their low maintenance and anti-bacterial and waterproof characteristics and are applicable in the commercial and residential settings.
Wooden floor sheets or the vinyl wood flooring are ideal for those who want to experience the coziness and sophistication of timber and yet feel that they do not have to spend a lot of money to maintain them. The sheets are patterns and textures of the woods, but they are not only waterproof and easy to clean like PVC vinyl flooring, they are also perfect in bedrooms, living rooms, and offices.
A floor sheet or mat sheet is a plastic sheet for the floor designed for atmospheres that need additional strength, i.e., workplaces, gyms, and warehouses. They are highly resistant, anti-slip, and resistant to moisture hence a functional and cost-effective flooring material.
Antibacterial vinyl sheets, anti-skid sheets and geomembrane sheets can be used in specialist applications: geomembrane sheets are engineered to offer high performance and protection.
Anti-Bacterial: The use of antibacterial sheets is also very common in hospitals and clinics and even laboratories where hygiene and sanitation are of great concern.
Anti-skid floor sheets: They would be perfect in the bathroom, kitchen, and ramps to avoid slips.
Geomembrane sheets are also applicable in waterproofing construction such as basements, water tanks, and rooftops, as the membrane is fully waterproof.
These high technologies offer customized solutions in the environment that are required to be safe, clean, and durable.
In the event that we are addressing a floor sheet price in Pakistan, we need to know that there are a number of factors that influence the final price. These are the type of material (homogeneous or heterogeneous), the thickness, the finish/design, the brand, and the costs of installation or the adhesive process. I have detailed each of these below and then given a rough price band as a guide.
A homogeneous floor sheet is one that is made of a uniform material all the way through and is more likely to be stronger and thus costs more. A heterogeneous construction is made with layered materials (design layer, wear layer, and core), which is more design-flexible but may cost differently.
Thickness & Wear-Layer
Lifespan and cost are significantly determined by the thickness (such as 2 mm, 3 mm, etc.), not to mention the wear layer (the top protective layer). The high-wear-layer sheets are more costly, though they are of better quality in terms of heavy traffic.
Finish & Design
Designer-style finishes such as wood look, marble look, stone look, etc. increase the cost when compared to plain solid colors. The more complex the pattern or grain, the higher the price.
Brand & Quality
The prices of renowned manufacturers or brands in Pakistan (such as local large-scale manufacturers) are high due to reputation, quality control, and warranty services.
Installation & Adhesive
When purchasing a floor sheet, keep in mind the price of subfloor preparation, glue, work (when you are outsourcing to install it), and wastage. All this is in addition to the cost of the base material. Always ask for full quotes.
Prices are highly differentiated depending on the factors mentioned above. The sales listing of retail in Pakistan generally has a price range of about PKR 180 per square foot of the basic vinyl in sheet form, with more expensive designer or commercial-grade materials being sold at much more. As an illustration, luxury vinyl plank or vinyl wooden floor is quoted by one supplier at Rs 180-300 per square foot based on quality.
In other cases, there is another listing that shows that the cost of vinyl flooring in Pakistan ranges between PKR 60 and PKR 150 per square foot for the cost of the basic quality.
Entry/nose quality: beginning at PKR 60 150/sq ft.
Average, well-designed, and thick: PKR 180-250/sq ft.
High-quality designer/business grade: perhaps PKR 250-300+/sq ft or higher.
Note: these are only approximate numbers. The actual cost will be based on your area (city/neighborhood) of project size and the terms offered by the supplier.
Suppliers should always provide complete sample and warranty information when you are getting a quote on your project. Take a sample of the floor sheet, examine wear layer thickness, design realism, and installation technique, and query what warranty and post-sales service they will offer.
A vinyl or PVC floor sheet is a relatively easy DIY project when one has time to do it and with adequate preparation. In a small room or residential area, one can finish installation in the course of a weekend. In the case of big commercial projects, though, it is highly encouraged to employ professionals to do the installation to provide smooth finishes and long life. Preparation of the subfloor and maximum accuracy in cutting are the keys to success; any shortcuts may influence the durability of your flooring and its appearance.
Step 1: Material Measurement and Estimation.
Begin by precisely measuring the length and width of the room to determine the area of the room. Always buy 10-15 percent more fabric to have on hand in case of trimming, corners, and matching a pattern. When cutting a floor sheet roll using a roll of sheet, mark dimensions with a chalk line or pencil before cutting to reduce wastage.
Step 2: Subfloor Preparation—Cleaning and Leveling.
A good subfloor is necessary, clean, smooth and dry. Clean dust, debris or residual adhesive. Seal cracks or discontinuities with floor patch compounds. The cleaner and flatter your base, the more it will stick and look like a vinyl sheet when it is set on it.
Step 3: Underlayment with the selection of the correct adhesive.
In the majority of interiors, a smooth plywood or concrete base is appropriate. In case your subfloor is imperfect, there is the consideration of a sheet of underlayment to add to it to make it steady. Choose the adhesive that your manufacturer of the vinyl sheet flooring recommends to use—full-spread glue or perimeter-bonding adhesive. Spread using a notched trowel.
Step 4: Lay the Sheet, Match the Seam, and Trim.
Carefully roll out the sheet on the floor, making sure that the design or pattern lies in one piece where several pieces are used. Apply pressure on the sheet gradually over the adhesive and roll any air bubbles with a roller or soft broom. Use a utility knife to cut squarely around the edges of walls, corners or door frames.
Step 5: Roll and Seal the Seams
Bonding should be done by using a heavy floor roller (usually 45-75 kg). Seal seams with a vinyl seam sealer in wet environments such as bathrooms or kitchens to avoid the seepage of water and ensure the water does not seep through.
Step 6: Final Operating and Curing Period.
After the installation, do not subject the adhesive to heavy foot traffic within the next 24 hours to give the adhesive time to be fully set. Replace the skirting or baseboard and empty the surface with a wet mop to clean up the installation dust.
Tips for a Professional Finish
To acclimatize the floor sheet roll in the room, place the roll in the room 24 hours prior to installation to acclimatize to temperature and humidity.
Do not stretch or push the sheet to corners.
Rolling should be done using smooth and consistent strokes to avoid air bubbles.
In the case of commercial or hospital work, one should always seek the services of a professional so that the work can be long-lasting.
Keeping your vinyl sheet flooring clean is simple, but consistent care makes all the difference in how long it lasts and how fresh it looks. One of the major advantages of using a PVC floor sheet is its low-maintenance nature—it doesn’t require waxing, polishing, or expensive cleaning products. With just a few easy steps, you can keep your floor sheet spotless, hygienic, and looking as good as new for years.
Dust, sand, and small debris can act like abrasives, slowly dulling your floor’s surface. Sweep or use a soft dry mop daily to prevent dirt buildup. For commercial areas or high-traffic rooms, you may also use a vacuum designed for hard floors—but make sure it has no beater bar to avoid surface scratches.
Avoid stiff-bristled brooms or harsh brushes that can damage the protective wear layer of the vinyl.
For routine maintenance, use a damp mop with a mild, pH-neutral floor cleaner. Mix a few drops of dish soap with warm water or use a vinyl-safe detergent. Mop gently—excess water can seep into seams and affect adhesive bonding, especially in older installations.
Avoid abrasive powders, bleach, or ammonia-based products. These can fade the color or weaken the vinyl floor sheet over time.
Accidents happen—spills, shoe marks, or food stains. For most stains:
Wipe immediately with a damp cloth.
For tougher stains like ink or lipstick, use a small amount of rubbing alcohol on a microfiber cloth.
For scuff marks, a soft melamine sponge (magic eraser) works effectively without scratching.
Always test cleaning products in an inconspicuous corner first.
Once a month, do a deeper clean:
Move furniture carefully and clean under it.
Mop using a solution of 1 cup of white vinegar in a gallon of warm water for natural disinfection and shine.
Wash with fresh water to get rid of any leftovers.
Maintaining a vinyl or PVC floor sheet isn’t just about cleaning—prevention matters too:
Place mats at entrances to trap dust and moisture.
Use felt pads under furniture legs to prevent dents or scratches.
Avoid dragging heavy objects across the floor.
Maintain indoor humidity levels to prevent sheet expansion or curling.
If you use an antibacterial vinyl sheet flooring, regular cleaning enhances its hygiene and lifespan, making it ideal for hospitals, clinics, and schools.
Unlike hardwood, vinyl sheets can’t be sanded or refinished. If you notice deep cuts, discoloration, or peeling seams, consult your flooring supplier for repair kits or partial replacement options. A well-maintained floor sheet can easily last 10–15 years depending on usage and environment.
A vinyl or PVC floor sheet rewards consistent care—no complex maintenance, no expensive treatments. Sweep daily, mop weekly, and protect it from sharp objects and moisture. With the right routine, your flooring will keep its shine, hygiene, and beauty for years, proving why vinyl sheet flooring remains one of the most practical choices for modern homes and businesses.
One of the most popular trends is the wooden vinyl floor sheet, which mimics the beauty of real timber without the high cost or maintenance.
Aesthetic: Realistic grains and shades of oak, walnut, maple, and cherry.
Applications: Ideal for bedrooms, living rooms, and offices where warmth and coziness are desired.
Advantages: Termite-resistant, waterproof, and easier to clean than actual wood.
These designs are available in a plank look, offering elegant visuals with seamless installation.
For a more premium interior finish, marble-look PVC flooring sheets offer the elegance of natural stone without the expense or cold touch.
Aesthetic: Glossy surfaces with patterns resembling Italian marble, granite, or terrazzo.
Applications: Perfect for lounges, hotel lobbies, showrooms, and office entrances.
Advantages: Non-porous, stain-resistant, and ideal for high-traffic areas.
Many Pakistani interior designers now recommend these sheets as a cost-effective alternative to marble flooring, especially for renovation projects.
For hospitals, laboratories, and schools, plain homogeneous vinyl sheets remain the top choice.
Aesthetic: Simple, solid colors like pale blue, light grey, or white.
Applications: Healthcare and educational facilities where hygiene and safety are key.
Advantages: Seamless installation prevents dirt buildup and supports antibacterial protection.
Decora and similar manufacturers in Pakistan offer custom colors and finishes to match branding or interior themes.
If you’re designing a contemporary interior, patterned vinyl sheets add visual interest.
Aesthetic: Geometric patterns, matte textures, or embossed finishes.
Applications: Restaurants, retail shops, and creative studios.
Advantages: Slip-resistant and adds dimension to small spaces.
Anti-skid vinyl sheet flooring in textured form is particularly popular for bathrooms, gyms, and kids’ play areas.
Not all floor sheets are for decoration—many are built for heavy-duty performance.
Anti-bacterial vinyl sheets: Used in hospitals, labs, and clean rooms.
Anti-static sheets: Ideal for electronics manufacturing facilities.
Geomembrane & waterproof sheets: Applied in basements, rooftops, or water tanks.
These specialized PVC flooring sheets are designed for maximum safety, hygiene, and durability under demanding conditions.
The Pakistani market is rapidly moving towards:
Eco-friendly materials with recyclable PVC content.
Custom-printed vinyl sheets with branding or patterns.
Large-format rolls for faster installation in commercial spaces.
Locally manufactured floor sheets offering better value than imported brands.
Cities like Lahore, Karachi, and Islamabad are seeing growing demand for floor sheets for homes and offices, as architects and contractors choose them for their balance of design flexibility, hygiene, and cost-efficiency.
The range of floor sheet designs in Pakistan today caters to every need—from decorative wood and marble patterns to hygienic hospital-grade vinyl. Whether you’re furnishing a home, shop, or healthcare facility, there’s a PVC floor sheet that combines style, strength, and value.
With the right design choice and professional installation, vinyl floor sheets can transform your space beautifully and last for years—proving why they remain one of the best flooring solutions in Pakistan.
For over four decades, Decora has been a pioneer in vinyl flooring manufacturing in Pakistan, offering a complete range of PVC floor sheets, vinyl rolls, and anti-bacterial hospital-grade flooring. Proudly manufactured locally since 1983, Decora ensures international quality standards with the flexibility to customize thickness, color, and design according to project needs.
Whether you’re upgrading a home, hospital, school, or commercial space, Decora provides:
Homogeneous & heterogeneous vinyl sheets
Wood-look and marble-look designs
Anti-skid and anti-bacterial flooring solutions
You can explore their product range and request free samples directly at Decora’s official website or visit their nationwide dealer network for personalized consultation.
Local Buying Tip
When comparing floor sheet prices in Pakistan, always check:
Sheet thickness and warranty coverage
Installation costs and adhesives included
After-sales service and availability of matching trims or accessories
Buying directly from a local manufacturer like Decora helps you save on import costs and ensures authentic, long-lasting flooring—trusted by architects, contractors, and institutions across Pakistan.
Choosing the right floor sheet can transform your space—combining style, durability, and practicality at an affordable cost. Whether you need PVC, vinyl, or anti-bacterial flooring, quality and installation make all the difference.
As a pioneer in vinyl flooring manufacturing since 1983, Decora continues to lead Pakistan’s market with locally produced, high-quality floor sheets designed for homes, hospitals, and commercial projects.
Explore modern designs, get expert guidance, or request a free quote today at www.decora.com.pk—and bring long-lasting beauty and performance to every floor.
FAQs
A floor sheet is a continuous PVC or vinyl material used to cover floors in homes, hospitals, and commercial spaces. It provides a durable, waterproof, and easy-to-clean surface—making it a cost-effective alternative to traditional tiles or marble.
2. How long does a vinyl floor sheet last?
With proper maintenance, a high-quality PVC or vinyl floor sheet can last 10 to 15 years. Regular cleaning and avoiding sharp objects or heavy dragging can extend its life.
3. Can I install vinyl floor sheets myself?
Yes—small residential rooms can be done as a DIY project, but professional installation is recommended for commercial spaces to ensure proper adhesion and seam sealing.
You can buy vinyl and PVC flooring sheets from Decora, a pioneer in local manufacturing since 1983. Decora offers a wide range of designs, including wood-look, marble-look, and anti-bacterial vinyl flooring. Visit www.decora.pk
to explore options or request a quotation.
5. Are floor sheets suitable for hospitals and schools?
Absolutely. Antibacterial homogeneous vinyl sheets are widely used in hospitals, clinics, and educational institutions due to their seamless surface, hygiene, and durability.
As a PVC industry leader, we offer more than just PVC flooring products – consultation, installation, maintenance, and a customer-centric approach emphasizing honesty, transparency, and exceptional service
0 COMMENTS